|
A degreaser solution that removes dirt, dust and oils
from all fabrics, new and used.
Degreasing should be considered a first step in
stencil-making, as it greatly reduces the risk of stencil-making
failure, extends on-press stencil longevity, and alleviates pinholing. Screen
Degreaser Liquid No. 3 is ready-to-use--no mixing. Degreases
effectively in hard water. Rinses clean with hot or cold water.
Non-caustic--will not harm frames, fabric, or adhesives on
stretch and glue frames. Reccomended for use with all Ulano
stencil systems.
- If using Screen
Degreaser Concentrate No. 33, mix ten parts water to one part
Ulano No. 33.
- Apply Screen
Degreaser Liquid
No. 3 or Screen Degreaser Concentrate No. 33 to a wet screen from
both sides with a wet, soft, long-bristle nylon brush.
Continue brushing until a light foam develops.
- Let the screen stand a few minutes until the foam
subsides.
- Rinse the screen thoroughly from both sides. Including
the inside edge of the frame and the frame corners, with
hot or cold water.
After ink removal, spray both sides of the screen with water
and apply Screen
Degreaser Liquid
No. 3 or Screen Degreaser Concentrate No. 33 as in degreasing (above).
Rinse with tap water. Degreasing helps remove oily ink residues,
washup solvents and makes the stencil more receptive to water-borne removal chemicals.
Screen Degreaser Liquid No. 3 may be irritating upon
prolonged contact with the skin or eyes. First Aid:
In case of contact with the eyes or skin, flush immediately
with water. If irritation develops, contact a physician.
|
