E-Z Coat provides superior performance at a budget price. Its sturdy construction guarantees consistent, reproducible coatings. The maintenance-free coating carriage drive, with vibration-free linear guides on both sides of the coating carriage, can be programmed for variable coating speeds. The coating trough’s contact pressure and angle are set permanently for reproducible results.The screen frame holder lock accommodates all screen frame sizes up to the maximum specification and facilitates fast screen size changeovers with an easy adjustment of the top tension bar.

E-Z Coat is controlled by an electronic memory system through a straightforward, user-friendly switch panel. The operation of E-Z Coat is simplicity itself: program the coating speed and number and sequence of coats, then press the start button. E-Z Coat does the rest.

PRODUCT FEATURES BENEFITS
• Pre-assembled Ready-to-use
• Solid construction Reproducible results
• Adjustible coating speed Control of coating
• Vibration free, double linear guides Smooth, chatter-free coating
• Fixed coating trough pressure
• and angle Consistent stencil making
• Easy adjusting top tension bar Fast changeover time between frame sizes
• Electronic memory control Full automation
• Can hold two frames for tandem coating & faster stencil throughput
• Maximum frame to 55 X 57 inches (140 X 145 cm) OD
• Minimum frame size 16 inches - Less than 16" possible with custom order
• Maximum frame thickness 2 inches (50 mm)
• Coating Speed Range - 1 inch (25mm) per second to 3 inches (75mm) per second
• Width: 88 inches (223 cm); height: 77 inches (195 cm); depth: 16½ inches (42 cm.)
• Weight: 762 pounds (300 kg)
• Power Requirements


• Electricity: 110 volts; 50/60 cycles; power, 0.2KW; fuse, 10 amps.
• Compressed Air (water free) connected load: 6 bar; consumption: 2 liters/minute. (If compressed air is unavailable, a quiet-running compressor is available for purchase with the machine.)