COMPUTER-TO-SCREEN (CTS) | PROJECTION EMULSIONS

 

CTS FAST | Very Fast, Pure Photopolymer (SBQ) Screen Emulsion for Computer-to-Screen Exposure Systems

QX-6 | Fast-Exposing, SBQ-Dual Cure “Hybrid” Solvent Resistant Emulsion for Industrial and PCB Printing; Ideal for Computer-To-Screen LED and Laser Exposure Units

 

CTS-FAST/CTS-FAST BLUE | Very Fast, Pure Photopolymer (SBQ) Screen Emulsion for Computer-to-Screen Exposure Systems

CTS-FAST is an SBQ-sensitized, pure photopolymer direct emulsion intended for exposure using CST UV units and for printing using conventional UV or solvent-based inks. It is recommended for the production of general large-format work, such as posters, outdoor advertising, and other large-scale industrial applications. CTS-FAST is a ready-to-use, high solids emulsion that requires as few as one coat for a good printing edge, even on coarse fabric. CTS-FAST has excellent coating properties, good solvent resistance, and durability. The very fast exposure speed of CTS-FAST makes it ideal for pixel exposure—and, in turn, allows faster throughput, as well as savings on expensive CTS bulbs. Viscosity: 4500 – 5500 centipoise.

 

FEATURES

BENEFITS

Very fast exposure with good exposure latitude

Excellent wet strength
Reliable performance


Pre-sensitized; pure photopolymer (SBQ)

No mixing; ready-to-use
Idea for warm, humid climates
Long pot and coated screen life


33% solids content

Fast drying and stencil throughput
Good stencil build per coat


Good solvent resistance

Easy to reclaim


Moisture Resistant

Will not become tacky under high humidity conditions


High Contrast Color

Good see-through registration
Easy inspection on white or dyed fabric

 

FORMATS
CTS-FAST is available in U.S. 1 and 5 gallon units (≈ 3.78 and 18.9 liters, respectively).

Product Fact Sheet (English)

Tech Data Sheet (English)

QX-6 | Fast-Exposing, SBQ-Dual Cure “Hybrid” Solvent Resistant Emulsion for Industrial and PCB Printing; Ideal for Computer-To-Screen LED and Laser Exposure Units

QX-6 (former DP-810) is a universal SBQ-dual cure emulsion with superior resolution for industrial graphics and electronics printing (PCB and conductive traces), compatible with UV and virtually all solvent-based Inks. QX-6 is formulated for sensitivity to UV and near-UV-visible blue light, by means of UV LED and laser-based computer-to-screen exposure. It can be also exposed with traditional metal halide light sources. QX-6 features very fast exposure speed, while offering excellent exposure latitude. It provides non-tacky surfaces, high humidity resistance, and good durability with easy reclamation. QX-6 features excellent resolution, good edge definition, and very good wet strength. By using specially optimized sensitizers and given its light blue color, QX-6 facilitates excellent exposure light penetration, ensures thorough curing, eliminating or reducing latent haze on the mesh after decoating.

 

FEATURES

BENEFITS

Specially Optimized Sensitizers

Ideal for computer-to-screen UV LED and UV laser-based exposure units

Excellent through-exposure curing

Easy reclamation with minimal or no haze


Wide Exposure Latitude

Reliable performance in less than ideal shop conditions

Easy to reclaim, even if underexposed and used with aggressive solvents


Pre-sensitized; pure photopolymer (SBQ)

No mixing; ready-to-use
Idea for warm, humid climates
Long pot and coated screen life


37% solids content

Fast drying and stencil throughput
Good stencil build per coat


Good solvent resistance

Easy to reclaim


Moisture Resistant

Will not become tacky under high humidity conditions


Light Blue Color

Good see-through registration
Excellent through-exposure curing

 

FORMATS
QX-6 is available in U.S. 1 and 5 gallon units (≈ 3.78 and 18.9 liters, respectively).

Product Fact Sheet (English)