ALL PURPOSE INK WASH

All-Purpose Ink Wash is a blend of solvents for the manual removal of virtually all screen printing inks. All-Purpose Ink Wash can also be used as activator for dried Walk Away Haze Remover.

FEATURES

  • Effective with a wide variety of screen printing inks
  • Dissolved ink and All-Purpose Ink Wash can be rinsed with water
  • Advanced solvent blend formulation with high flash point (156ºF - 69ºC)
  • Can be used as a haze remover activator with Walk Away Haze Remover
  • 1 year shelf life at 69ºF (20ºC)

AVAILABILITY

  • 1/2PAPIW Ask your Ulano distributor for a free 8 oz. sample
  • QAPIW 1 quart (0.946 liters) 12 per case
  • GAPIW 1 gallon (3.785 liters) 4 per case
  • 5GAPIW 5 gallons (18.927 liters)
  • 50GAPIW 50 gallons (189.25 liters)

ECO-WASH 160

A FAST-ACTING, LOW VOC INK WASH FOR MOST SCREEN PRINTING INKS

Eco-Wash 160 is a fast-acting, low VOC (volatile organic compounds) ink wash for the manual or automated removal of virtually all screen printing inks. Eco-Wash 160 is especially effective for the removal of both traditional and non-phthalate plastisol and UV inks. Eco-Wash 160 is stable; it will not separate and does not require re-mixing. It also functions as a remover of fresh ink stains.

Tech Data Sheet (English)

Tech Data Sheet (Spanish)


INSTRUCTIONS

Step 1: APPLY Eco-Wash 160

Remove as much ink as possible with a scraper. Soak a work rag or brush with Eco-Wash 160 and apply it to both sides of the screen. Wait 1 -2 minutes, then brush it vigorously on both sides of the screen until the remaining ink is dissolved and can be wiped from the stencil.

Step 2: RINSE Eco-Wash 160 AND DISSOLVED INK FROM THE SCREEN

Rinse the screen with water, gently at first then with additional force. If any ink remains, apply additional Eco-Wash 160 to the screen and brush it every minute or two until the ink is dissolved. Remove the ink residue with a work rag and rinse the screen thoroughly with water.