STENCIL REMOVER POWDER NO.44 | UPS HAZ
Mix your own stencil remover and save money by not shipping water from Brooklyn. Perfect for dip tanks. Dissolve 2oz in 1 gallon of water. Use with all Ulano Direct-Emulsions, CDF® Direct-Films, and Pulsar indirect film. It is not effective on gelatin films (use Enzyme No. 1).
Clean ink from stencil.
Brush the liquid onto both sides.
Let stand for no more than 5 minutes.
Do not let any stencil remover dry on the mesh - it will lock the stencil in the mesh.
Rinse off with a mild spray of water to prevent splashing the stencil remover.
Rinse with a strong power water spray if necessary.
Ulano No. 44 Stencil Remover Powder is a strong oxidant. Contact with combustible or flammable material can cause fire. It can cause skin and eye irritation. Use gloves and goggles. Clean spills immediately.
First Aid: In case of contact with the eyes or skin, flush immediately with water for at least 15 minutes. If irritation develops, contact a physician.
- 1SRP44 1 lb. (454 g.)
- 25KILO44 25 Kilograms